Electric Moxa Device

The easy to use Electric Moxa Device requires no flame for ignition and emits no smoke; it has a simple on / off switch and uses Infra-red emitting on a similar wavelength to burning moxa. It can also be used through clothing or directly on to skin. Technical Specifications Optimum skin temperature: 40oC - 45 oC at room temperature (An advisable distance from the heater to surface of the skin) Power Source: Input voltage: 100 - 240 VAC, 0.6 A, 50 - 60 Hz Output voltage: 24 VDC 1.04 A Electrical Power: 20W Timer: 10 min, 20 min Buzzer: Will sound and stop to work automatically when the set time is up. Off-On switch: Power on, power off Pilot LED: Green LED indicates unit is switched on. Yellow LED indicates heat function is on. Safety Protection: 1. Temperature control thermostat within temperature 40oC - 45 oC (at room temperature) 2. Thermal cut off Fuse 2A 102oC (inside heater) 3. Current fuse: 2A 125V (inside unit) Size: Device L 155mm x H 130mm x W 85mm Probe Diameter 28mm x L 130mm (not including heater) Heater Diameter 25mm x L 60mm (not including safety shield) Plug in switching Power supply L 84mm x W 56mm x H 37.9mm Weight: Device (including heater and stand) 510gms Device accessory, plug in switching power supply 240gms Operation environment: 10 oC - 35 oC (50 oF - 95 oF) RH 35 75 % - 1060 hPa Device classification: Class IIa Compliance: Standards EN60601-1, EN60601-1-2