Pointer Pulse Laser and Pulsed T.E.N.S
In stock
The Pointer Pulse is the next generation handheld locator/stimulator! The Pointer Pulse is the first all-in-one unit that combines laser therapy with electrical stimulation, allowing both methods of treatment to be used simultaneously or separately.
The device measures relative skin resistance at the treatment location through sound as well as a green light indicator found on the top of the unit. Location sensitivity and sound level are adjustable.
An effective push button adjustable stimulation offers immediate treatment. Based on the setting of the output dial, either milliamp or microamp current output is produced (ie, blue zone on the dial is milliamp).
Laser therapy is administered using a 650 nm, 5 mW laser contained in the device. Three modes of treatment are available, selected by using a toggle switch located between the grounding plate and stimulation button: on (continuous laser beam), pulsed (10 Hz pulsed laser beam) and off (no laser beam). The device is successfully in laser mode when the yellow light indicator on the top of the unit is on.
With its ergonomic design and single grounding plate, this device can easily be used with either the left or right hand. Probe tip is removable for easy cleaning. Accessories include a hand ground pole with attached wire, 9 volt battery, small screwdriver (for adjusting sound level), carrying case, and instructions. There is a 1-year warranty on this device.
Note: Conductive gel may clog laser probe opening and diminish output. Use of gel with this device is not recommended.
Specifications
500 ohm test load
Output channels One
Volts & current
Normal dial 22.5 volts, 0 to 45 milliamps
Blue zone 11.0 volts, 0 to 2 microamps
Pulse width 260 microseconds (us)
Pulse shape asymmetric biphasic square wave with negative spike
Pulse modes continuous
Laser wavelength 650 nm
Maximum laser power 5 Mw
Skin impedance monitoring sound and green light indication
Laser operation yellow light indication
Power source 9 volt battery
Size, wt, colour 9.0” x 3.5” x 1”, 100gm, beige
£194.95
The Pointer Pulse is the next generation handheld locator/stimulator! The Pointer Pulse is the first all-in-one unit that combines laser therapy with electrical stimulation, allowing both methods of treatment to be used simultaneously or separately.
The device measures relative skin resistance at the treatment location through sound as well as a green light indicator found on the top of the unit. Location sensitivity and sound level are adjustable.
An effective push button adjustable stimulation offers immediate treatment. Based on the setting of the output dial, either milliamp or microamp current output is produced (ie, blue zone on the dial is milliamp).
Laser therapy is administered using a 650 nm, 5 mW laser contained in the device. Three modes of treatment are available, selected by using a toggle switch located between the grounding plate and stimulation button: on (continuous laser beam), pulsed (10 Hz pulsed laser beam) and off (no laser beam). The device is successfully in laser mode when the yellow light indicator on the top of the unit is on.
With its ergonomic design and single grounding plate, this device can easily be used with either the left or right hand. Probe tip is removable for easy cleaning. Accessories include a hand ground pole with attached wire, 9 volt battery, small screwdriver (for adjusting sound level), carrying case, and instructions. There is a 1-year warranty on this device.
Note: Conductive gel may clog laser probe opening and diminish output. Use of gel with this device is not recommended.
Specifications
500 ohm test load
Output channels One
Volts & current
Normal dial 22.5 volts, 0 to 45 milliamps
Blue zone 11.0 volts, 0 to 2 microamps
Pulse width 260 microseconds (us)
Pulse shape asymmetric biphasic square wave with negative spike
Pulse modes continuous
Laser wavelength 650 nm
Maximum laser power 5 Mw
Skin impedance monitoring sound and green light indication
Laser operation yellow light indication
Power source 9 volt battery
Size, wt, colour 9.0” x 3.5” x 1”, 100gm, beige
Colour Code/Gauge | Royal Blue (0.10mm) |
---|
Write Your Own Review